Low-voltage switchgear

Usage environment:

The ambient air temperature shall not exceed+40 ℃, not be lower than -50 ℃, and the average temperature within 24 hours shall not exceed+35 ℃

Atmospheric conditions, clean air, and relative humidity not exceeding 50% at a maximum temperature of+40 ℃. Higher relative humidity is allowed at lower temperatures, such as 90% at+20 ℃, but temperature changes should be taken into account as moderate condensation may occur accidentally.

This device is suitable for transportation and storage at temperatures ranging from -25 to+55 ℃, and can reach+70 ℃ in a short period of time (not exceeding 24 hours). At this extreme temperature, the device should not suffer any irreparable damage and should be able to function normally under normal conditions.

If the above usage conditions cannot be met, it should be resolved through negotiation between the user and the manufacturer.

When this device is used on offshore oil drilling platforms and nuclear power plants, a separate technical agreement should be signed.

Product Features:

Compact design: able to accommodate more functional units in a smaller space.

Strong structural versatility and flexible assembly: C-shaped profiles with a module of 25mm can meet the requirements of various structural forms, protection levels, and usage environments.

Adopting standard module design: standard units such as protection, operation, conversion, control, adjustment, measurement, and indication can be assembled separately, and users can choose to assemble them according to their needs. More than 200 components can be used to form different framework structures and drawer units.

Safety: A large number of high-strength flame-retardant engineering plastic components are used to effectively enhance the protective and safety performance.

High technical performance: The main parameters have reached the contemporary international technological level.

Compressed site: With a high degree of industrialization, it can greatly compress the storage and transportation of prefabricated components.

Easy to assemble: No need for special complex tools.